Concrete floating dock consultation

Floating dockComposed of dock panels, aluminum alloy skeleton/galvanized steel structure skeleton, PE plastic floating box, and precast concrete floating box.

The panel is made of 28mm thick anti-corrosion wood; The aluminum alloy skeleton is welded and processed, with anti-corrosion treatment on the surface. The profile number is 6061-T6, and the main profile of the skeleton is extended

The weight of the steel structure is 10.41Kg, and the load-bearing skeleton is made of Q235 steel with a galvanized thickness of not less than 100 μ m; The outer shell of the PE plastic floating box is made of high-density polyethylene material,

Filled with polystyrene EPS foam; The high-strength special formula concrete of the concrete prefabricated component pontoon is cast in situ at one time and filled with high-density polystyrene foam.

Rubber fenders are installed on both sides of the aluminum alloy/steel structure skeleton as protective facilities for the dock's berthing.

If you need a quotation, you can consult online or add our professional engineer 13926167001 (same WeChat account)We will serve you wholeheartedly~

Approach bridge:The approach bridge adopts an aluminum truss structure. In this project, a total of three approach bridges are arranged, with a calculated axis length of 9m, a calculated axis width of 1.2m, and two calculated axis lengths

The degree is 16m, and the calculated axis width is 1.2m per seat.

Pile holder:The aluminum alloy skeleton dock adopts aluminum alloy structure pile drivers, and the hydrophilic floating bridge (steel structure skeleton) adopts steel pile drivers, welded from profiles and castings

Subsequently, the roller of the pile gripper is made of PA material, with a standard single wheel bearing capacity of 30KN.

Concrete floating box:

Concrete wharf: